Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
import asyncio
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
import pytest
|
|
|
|
|
2019-04-23 22:44:42 +01:00
|
|
|
from bs4 import BeautifulSoup
|
|
|
|
|
2016-10-14 23:36:58 +01:00
|
|
|
from sanic import Sanic
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
from sanic.exceptions import Forbidden, InvalidUsage, NotFound, ServerError
|
2017-03-06 14:00:04 +00:00
|
|
|
from sanic.handlers import ErrorHandler
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
from sanic.response import stream, text
|
2019-04-23 22:44:42 +01:00
|
|
|
|
2016-10-14 23:36:58 +01:00
|
|
|
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
async def sample_streaming_fn(response):
|
|
|
|
await response.write("foo,")
|
|
|
|
await asyncio.sleep(0.001)
|
|
|
|
await response.write("bar")
|
|
|
|
|
|
|
|
|
|
|
|
class ErrorWithRequestCtx(ServerError):
|
|
|
|
pass
|
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@pytest.fixture
|
|
|
|
def exception_handler_app():
|
|
|
|
exception_handler_app = Sanic("test_exception_handler")
|
2016-10-14 23:36:58 +01:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/1", error_format="html")
|
|
|
|
def handler_1(request):
|
|
|
|
raise InvalidUsage("OK")
|
2016-10-14 23:36:58 +01:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/2", error_format="html")
|
|
|
|
def handler_2(request):
|
|
|
|
raise ServerError("OK")
|
2016-10-14 23:36:58 +01:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/3", error_format="html")
|
|
|
|
def handler_3(request):
|
|
|
|
raise NotFound("OK")
|
2016-10-14 23:36:58 +01:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/4", error_format="html")
|
|
|
|
def handler_4(request):
|
|
|
|
foo = bar # noqa -- F821
|
|
|
|
return text(foo)
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/5", error_format="html")
|
|
|
|
def handler_5(request):
|
|
|
|
class CustomServerError(ServerError):
|
|
|
|
pass
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
raise CustomServerError("Custom server error")
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/6/<arg:int>", error_format="html")
|
|
|
|
def handler_6(request, arg):
|
|
|
|
try:
|
|
|
|
foo = 1 / arg
|
|
|
|
except Exception as e:
|
|
|
|
raise e from ValueError(f"{arg}")
|
|
|
|
return text(foo)
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/7", error_format="html")
|
|
|
|
def handler_7(request):
|
|
|
|
raise Forbidden("go away!")
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.route("/8", error_format="html")
|
|
|
|
def handler_8(request):
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
raise ErrorWithRequestCtx("OK")
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.exception(ErrorWithRequestCtx, NotFound)
|
|
|
|
def handler_exception_with_ctx(request, exception):
|
|
|
|
return text(request.ctx.middleware_ran)
|
2016-10-14 23:36:58 +01:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.exception(ServerError)
|
|
|
|
def handler_exception(request, exception):
|
|
|
|
return text("OK")
|
2016-10-14 23:36:58 +01:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.exception(Forbidden)
|
|
|
|
async def async_handler_exception(request, exception):
|
|
|
|
return stream(
|
|
|
|
sample_streaming_fn,
|
|
|
|
content_type="text/csv",
|
|
|
|
)
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
@exception_handler_app.middleware
|
|
|
|
async def some_request_middleware(request):
|
|
|
|
request.ctx.middleware_ran = "Done."
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
return exception_handler_app
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_invalid_usage_exception_handler(exception_handler_app):
|
2018-12-30 11:18:06 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/1")
|
2016-10-14 23:36:58 +01:00
|
|
|
assert response.status == 400
|
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_server_error_exception_handler(exception_handler_app):
|
2018-12-30 11:18:06 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/2")
|
2016-10-14 23:36:58 +01:00
|
|
|
assert response.status == 200
|
2018-12-30 11:18:06 +00:00
|
|
|
assert response.text == "OK"
|
2016-10-14 23:36:58 +01:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_not_found_exception_handler(exception_handler_app):
|
2018-12-30 11:18:06 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/3")
|
2016-10-14 23:36:58 +01:00
|
|
|
assert response.status == 200
|
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_text_exception__handler(exception_handler_app):
|
2018-12-30 11:18:06 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/random")
|
2016-10-14 23:36:58 +01:00
|
|
|
assert response.status == 200
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
assert response.text == "Done."
|
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_async_exception_handler(exception_handler_app):
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/7")
|
|
|
|
assert response.status == 200
|
|
|
|
assert response.text == "foo,bar"
|
2017-01-13 00:54:34 +00:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_html_traceback_output_in_debug_mode(exception_handler_app):
|
2018-12-30 11:18:06 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/4", debug=True)
|
2017-01-13 00:54:34 +00:00
|
|
|
assert response.status == 500
|
2018-12-30 11:18:06 +00:00
|
|
|
soup = BeautifulSoup(response.body, "html.parser")
|
2017-01-13 00:54:34 +00:00
|
|
|
html = str(soup)
|
|
|
|
|
2018-12-30 11:18:06 +00:00
|
|
|
assert "handler_4" in html
|
|
|
|
assert "foo = bar" in html
|
2017-01-13 00:54:34 +00:00
|
|
|
|
2018-12-30 11:18:06 +00:00
|
|
|
summary_text = " ".join(soup.select(".summary")[0].text.split())
|
2017-01-13 00:54:34 +00:00
|
|
|
assert (
|
2020-01-20 14:58:14 +00:00
|
|
|
"NameError: name 'bar' is not defined while handling path /4"
|
2018-12-30 11:18:06 +00:00
|
|
|
) == summary_text
|
2017-01-31 05:29:16 +00:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_inherited_exception_handler(exception_handler_app):
|
2018-12-30 11:18:06 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/5")
|
2017-01-31 05:29:16 +00:00
|
|
|
assert response.status == 200
|
2017-03-06 14:00:04 +00:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_chained_exception_handler(exception_handler_app):
|
2017-05-01 17:56:33 +01:00
|
|
|
request, response = exception_handler_app.test_client.get(
|
2018-12-30 11:18:06 +00:00
|
|
|
"/6/0", debug=True
|
|
|
|
)
|
2017-05-01 17:56:33 +01:00
|
|
|
assert response.status == 500
|
|
|
|
|
2018-12-30 11:18:06 +00:00
|
|
|
soup = BeautifulSoup(response.body, "html.parser")
|
2017-05-01 17:56:33 +01:00
|
|
|
html = str(soup)
|
|
|
|
|
2018-12-30 11:18:06 +00:00
|
|
|
assert "handler_6" in html
|
|
|
|
assert "foo = 1 / arg" in html
|
|
|
|
assert "ValueError" in html
|
2017-05-01 17:56:33 +01:00
|
|
|
|
2018-12-30 11:18:06 +00:00
|
|
|
summary_text = " ".join(soup.select(".summary")[0].text.split())
|
2017-05-01 17:56:33 +01:00
|
|
|
assert (
|
2020-01-20 14:58:14 +00:00
|
|
|
"ZeroDivisionError: division by zero while handling path /6/0"
|
2018-12-30 11:18:06 +00:00
|
|
|
) == summary_text
|
2017-05-01 17:56:33 +01:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_exception_handler_lookup(exception_handler_app):
|
2017-03-06 14:00:04 +00:00
|
|
|
class CustomError(Exception):
|
|
|
|
pass
|
|
|
|
|
|
|
|
class CustomServerError(ServerError):
|
|
|
|
pass
|
|
|
|
|
|
|
|
def custom_error_handler():
|
|
|
|
pass
|
|
|
|
|
|
|
|
def server_error_handler():
|
|
|
|
pass
|
|
|
|
|
|
|
|
def import_error_handler():
|
|
|
|
pass
|
|
|
|
|
|
|
|
try:
|
|
|
|
ModuleNotFoundError
|
2018-10-22 21:25:38 +01:00
|
|
|
except Exception:
|
2018-12-30 11:18:06 +00:00
|
|
|
|
2017-03-06 14:00:04 +00:00
|
|
|
class ModuleNotFoundError(ImportError):
|
|
|
|
pass
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
handler = ErrorHandler("auto")
|
2017-03-06 14:00:04 +00:00
|
|
|
handler.add(ImportError, import_error_handler)
|
|
|
|
handler.add(CustomError, custom_error_handler)
|
|
|
|
handler.add(ServerError, server_error_handler)
|
|
|
|
|
2021-08-31 10:32:51 +01:00
|
|
|
assert handler.lookup(ImportError(), None) == import_error_handler
|
|
|
|
assert handler.lookup(ModuleNotFoundError(), None) == import_error_handler
|
|
|
|
assert handler.lookup(CustomError(), None) == custom_error_handler
|
|
|
|
assert handler.lookup(ServerError("Error"), None) == server_error_handler
|
|
|
|
assert (
|
|
|
|
handler.lookup(CustomServerError("Error"), None)
|
|
|
|
== server_error_handler
|
|
|
|
)
|
2017-03-06 14:00:04 +00:00
|
|
|
|
|
|
|
# once again to ensure there is no caching bug
|
2021-08-31 10:32:51 +01:00
|
|
|
assert handler.lookup(ImportError(), None) == import_error_handler
|
|
|
|
assert handler.lookup(ModuleNotFoundError(), None) == import_error_handler
|
|
|
|
assert handler.lookup(CustomError(), None) == custom_error_handler
|
|
|
|
assert handler.lookup(ServerError("Error"), None) == server_error_handler
|
|
|
|
assert (
|
|
|
|
handler.lookup(CustomServerError("Error"), None)
|
|
|
|
== server_error_handler
|
|
|
|
)
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
|
|
|
|
|
2021-09-29 21:53:49 +01:00
|
|
|
def test_exception_handler_processed_request_middleware(exception_handler_app):
|
Streaming Server (#1876)
* Streaming request by async for.
* Make all requests streaming and preload body for non-streaming handlers.
* Cleanup of code and avoid mixing streaming responses.
* Async http protocol loop.
* Change of test: don't require early bad request error but only after CRLF-CRLF.
* Add back streaming requests.
* Rewritten request body parser.
* Misc. cleanup, down to 4 failing tests.
* All tests OK.
* Entirely remove request body queue.
* Let black f*ckup the layout
* Better testing error messages on protocol errors.
* Remove StreamBuffer tests because the type is about to be removed.
* Remove tests using the deprecated get_headers function that can no longer be supported. Chunked mode is now autodetected, so do not put content-length header if chunked mode is preferred.
* Major refactoring of HTTP protocol handling (new module http.py added), all requests made streaming. A few compatibility issues and a lot of cleanup to be done remain, 16 tests failing.
* Terminate check_timeouts once connection_task finishes.
* Code cleanup, 14 tests failing.
* Much cleanup, 12 failing...
* Even more cleanup and error checking, 8 failing tests.
* Remove keep-alive header from responses. First of all, it should say timeout=<value> which wasn't the case with existing implementation, and secondly none of the other web servers I tried include this header.
* Everything but CustomServer OK.
* Linter
* Disable custom protocol test
* Remove unnecessary variables, optimise performance.
* A test was missing that body_init/body_push/body_finish are never called. Rewritten using receive_body and case switching to make it fail if bypassed.
* Minor fixes.
* Remove unused code.
* Py 3.8 check for deprecated loop argument.
* Fix a middleware cancellation handling test with py38.
* Linter 'n fixes
* Typing
* Stricter handling of request header size
* More specific error messages on Payload Too Large.
* Init http.response = None
* Messages further tuned.
* Always try to consume request body, plus minor cleanup.
* Add a missing check in case of close_if_idle on a dead connection.
* Avoid error messages on PayloadTooLarge.
* Add test for new API.
* json takes str, not bytes
* Default to no maximum request size for streaming handlers.
* Fix chunked mode crash.
* Header values should be strictly ASCII but both UTF-8 and Latin-1 exist. Use UTF-8B to
cope with all.
* Refactoring and cleanup.
* Unify response header processing of ASGI and asyncio modes.
* Avoid special handling of StreamingHTTPResponse.
* 35 % speedup in HTTP/1.1 response formatting (not so much overall effect).
* Duplicate set-cookie headers were being produced.
* Cleanup processed_headers some more.
* Linting
* Import ordering
* Response middleware ran by async request.respond().
* Need to check if transport is closing to avoid getting stuck in sending loops after peer has disconnected.
* Middleware and error handling refactoring.
* Linter
* Fix tracking of HTTP stage when writing to transport fails.
* Add clarifying comment
* Add a check for request body functions and a test for NotImplementedError.
* Linter and typing
* These must be tuples + hack mypy warnings away.
* New streaming test and minor fixes.
* Constant receive buffer size.
* 256 KiB send and receive buffers.
* Revert "256 KiB send and receive buffers."
This reverts commit abc1e3edb21a5e6925fa4c856657559608a8d65b.
* app.handle_exception already sends the response.
* Improved handling of errors during request.
* An odd hack to avoid an httpx limitation that causes test failures.
* Limit request header size to 8 KiB at most.
* Remove unnecessary use of format string.
* Cleanup tests
* Remove artifact
* Fix type checking
* Mark test for skipping
* Cleanup some edge cases
* Add ignore_body flag to safe methods
* Add unit tests for timeout logic
* Add unit tests for timeout logic
* Fix Mock usage in timeout test
* Change logging test to only logger in handler
* Windows py3.8 logging issue with current testing client
* Add test_header_size_exceeded
* Resolve merge conflicts
* Add request middleware to hard exception handling
* Add request middleware to hard exception handling
* Request middleware on exception handlers
* Linting
* Cleanup deprecations
Co-authored-by: L. Kärkkäinen <tronic@users.noreply.github.com>
Co-authored-by: Adam Hopkins <admhpkns@gmail.com>
2021-01-10 22:45:36 +00:00
|
|
|
request, response = exception_handler_app.test_client.get("/8")
|
|
|
|
assert response.status == 200
|
|
|
|
assert response.text == "Done."
|